 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| UG1001 - UG1005 1.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER Features * * * * * * * Glass Passivated Die Construction Diffused Junction Ultra-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 A B A D DO-41 Dim A B C D Min 25.40 4.06 0.71 2.00 Max 3/4 5.21 0.864 2.72 C Mechanical Data * * * * * * Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.35 grams (approx.) Mounting Position: Any All Dimensions in mm Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range @ IF = 1.0A @ TA = 25C @ TA = 100C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr Cj RqJA Tj, TSTG @ TA = 25C unless otherwise specified UG1001 50 35 UG1002 100 70 UG1003 200 140 1.0 30 UG1004 400 280 UG1005 600 420 Unit V V A A 1.0 5.0 100 50 20 95 -65 to +150 1.3 1.7 V mA 75 10 ns pF K/W C Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS27008 Rev. A1-2 1 of 2 UG1001 - UG1005 I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.0 IF, INSTANTANEOUS FWD CURRENT (A) 10 0.8 UG1001 - UG1003 1.0 UG1004 0.6 0.4 0.1 UG1005 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 25 0.01 Tj = 25C Pulse width = 300s 50 75 100 125 150 175 200 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TA, AMBIENT TEMPERATURE (C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 IFSM, PEAK FORWARD SURGE CURRENT (A) 20 Cj, CAPACITANCE (pF) UG1001 UG1004 10 10 UG1005 0 Pulse width = 8.3ms single half sine-wave (JEDEC Method) 1 Tj = 25C f = 1.0MHz 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 100 50 NI (Non-inductive) Device Under Test 50V DC Approx 10 NI +0.5A (-) Pulse Generator (Note 2) (+) (-) 0A -0.25A 1.0 NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27008 Rev. A1-2 2 of 2 UG1001 - UG1005 |
Price & Availability of UG1005
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |